Posts

Showing posts from May, 2013

Braided Dragon Scale Bracelet

Image
Materials:  8 12-strand wires, 1.30 meters long,  5mm magnetic buckles,  a 3mm flexible tube,  401 glue.  Instructions:  Fold the 8 1.30-meter wires in half and secure them with thick wire. Add the 3mm flexible tube and wrap a 0.5cm thin wire around them to secure them. Place them in the weaving machine.  Arrange the wires. Using the black line on the weaving machine as the center, hang two wires on each side, four wires in each direction, for a total of 16 wires, as shown in Figure 8.  Route the wires. Set aside the 15*16-20*21, 16*17-21*22, 8*9-16*17, 7*8-15*16, 2*3-8*9, 1*2-7*8, 26*27-2*3, 25*26-1*2. Reposition the 21*22-24*25, and 20*21-23*24. Run this loop of yarn clockwise. Set aside 17*18 for 12*13, 18*19 for 13*14. 25*26 for 17*18, 26*27 for 18*19. 1*2 for 25*26, 2*3 for 26*27. 9*10 for 1*2, 10*11 for 2*3. Put 12*13 for 9*10, and 13*14 for 10*11 back in place.   Run this loop of yarn counterclockwise.   Repeat steps 3 ...

Kumihimo Starter Kit

Image
This Kumihimo starter kit provides the supplies you need to get going on your first Kumihimo project! It includes the following: A round braiding disk, easy to follow basic instructions, a mixed pack of beading cord (12 yards total, colors may vary), 8 flexible thread bobbins, gel glue, 1 pack of silver plated findings for finishing the design, and a zippered plastic carrying case to keep everything together. Note: The loom in this kit is a round loom for round braids only, not the Kumiloom.